Does this ridiculous number of antennas even do anything or is it just marketing wank?
Lord Sauron would like a word.
I’m a network professional with a specialty in wireless.
Yeah, beam forming and mimo are the main reasons for antenna diversity. There’s also more radio chains in those units typically, and more radio chains can provide better speeds if you have client devices that can take advantage of the extra radio chains (both sides need to have the same, increased number of radio chains to see an increase).
The antennas are fairly small/thin pieces of wire that are not very long, so the antennas don’t need to look like that, but the quantity is useful.
I believe it’s for beam forming which can be used to improve signal strength in a specific direction.
tell that to the $800 of copper running through my walls.
Hay $800 worth of copper, I found a 1000ft roll of shielded pure copper for $2.11 because someone misplaced the decimal point I know because it was listed for $2.1199 every thing was automated through amazon so they just shipped free shipping to, thank for listening $800 worth of copper, your the best.
Wireless tech has improved greatly over the last 20 years. Speed, latency, bandwidth, stability…all generally excellent. 15 years ago I wouldn’t have wanted to use a wireless mouse or LAN connection. Now? NBD. They just work. Still have issues with poor signal in some areas, but mesh range boosters take care of that pretty easily.
Wireless peripheral devices, sure, but if I’m streaming 4K with HD sound then I still want copper.
*Excluding running ethernet cables to every room through the attic, down the walls to wall jacks. Also the cost of the jacks, and the various switches needed for several rooms. And the contractor to do it all.
But hey for like $600 I have cat6a in basically every room so
And the contractor to do it all.
Why wouldn’t you do it yourself?
Like, in an old house its a massive pain in the ass to run that, but still firmly in DIY territory.
Disabled, so physically cannot do it, or I would.
Not everyone is comfortable drilling walls and installing plates, stripping wires, etc. and CAT cables aren’t like simple copper electrical wires.
And not everyone wants to have cables running along their floorboard and up their stairs
And then you still need a wireless router to get Internet on your phone unless you use data at home like a crazy person.
My PC, laptop, work laptop, are all wired using gigabit. But my laptop on wifi reach 1200Mbps so it’s faster than cable!
Faster than gigabit, but not 2.5 gigabit. Your cables likely support the speed, just your ports and switching hardware are capped at gigabit.
It’s not extremely expensive, but unless you move around a lot of big files, you’re probably getting very diminished returns, even spending less than twice as much for 2.5x speeds.
Impressive, I lose half my speed with the router around the corner.
If you have only one device on Wi-Fi, multiplexing turned off, or especially if you have MU-MIMO support, Wi-Fi can be faster than a single wired connection. It is still higher latency and subject to other drawbacks such as security and power consumption, but of course it offers advantages that can outweigh the disadvantages depending on use case and user needs.
That said, it’s technically not faster than the cable, but rather faster at the data link or network layer. For example, CAT8 physically supports up to 40Gbps, but most consumer and even professional electronics only support up to 2.5Gbps. Only really enterprise level switches can push up to like 100Gbps onto copper, and even then that’s using QSFP transceivers, not RJ-45 connections. Fiber cables regularly push 400Gbps.
Same lol. I get 800Mbps on Cat6, but 1100 on Wifi 6 with one of these fancy expensive 11000ax gaming routers that has all those antennas (antennae?).
Ethernet is obviously better but running ethernet around your home can be a pain in the arse
A pain in the arse you only need to do once, and you can hire someone to do it for you for basically the same cost as a couple of the high end wireless routers, so in like 5 years, you break even.
Also, how much have you spent on your computer (s), phone(s), tablet(s), and all your other internet connected devices, and you won’t spend like $500 on something that can run all that stuff simultaneously? Pouring literally thousands of dollars on connected devices, but most won’t pay more than they would for a toaster, to get them on the internet, then pay out the wahzoo for gigabit internet that your crummy d-link router can’t handle, and you wonder why all your fancy gadgets run like shit… It’s a lot like buying a Ferrari to drive on dirt/gravel roads.
I think it’s a little more than $500 to get Ethernet ports installed all around your house. Especially if you need to run through fire breaks and insulation. Will have to wait till a remodel before I can get those installed.
That said, I didn’t skimp on my home networking, even though it’s all wireless. I’ve got 4 WiFi 6 APs on PoE with Cat 6 runs thru the attic. I can get 700 Mbs+ download speeds pretty much anywhere in and around the house.
It could be, depending on where you land on the DIY vs building code spectrum… Also what your local building code details in terms of low voltage cable.
In my experience unless you’re intentionally going through air handling ductwork, CMG is fine, though I would go with CMR at least, just as a matter of safety. I have yet to see a residential home with any fire protection or fire breaks, at all, nevermind where you would think to put them, like between floors and whatnot. The homes in my area are mostly built from timber, so we’re basically living inside a framework of dried out wood, so putting a fire break between wood framed floors where the floor/ceiling shares a set of wooden cross members for support, seems like it would be unnecessary, since the framing of the building is going to conduct the fire between levels.
Ethernet is low voltage, so it’s largely unregulated. The only real regulation is regarding plenum or riser spaces, and the latter is mostly when floors are intentionally or naturally separated in terms of shared fate when it comes to fire. I only see fire breaks in concrete structures, usually apartments or commercial buildings.
YMMV, not every country has the same building codes, so every person reading this will need to do their own research or pay someone who knows.
My point remains, regardless of all this conjecture: even if it’s $2000 or more, this is structure cabling that should service the premise for as long as it continues to stand, which is hopefully many decades. Over 20 years, at $2000 for installation, you’re looking at a cost of around $8.34/mo for the cabling to exist.
Considering people will pay 10x that for Internet service, and the addition of Ethernet in the building will allow them to take full advantage of the internet they’re paying for, I’d call that a bargain.
Or if you rent. I could run an Ethernet cable to my office from my router, but it would have to run upstairs and across a few doorways.
Wifi 7 is insanely fast to the point where it can easily be just as good as wired ethernet and can even beat a lot of the wired standards except the few latest ones. It’s a good choice for devices where running a cable wouldn’t be very practical, but you need wired level speed and reliability.
wired level speed and
reliability.While WiFi is a lot better nowadays I’ve never seen it reach the reliability of wired networks.
I remember watching a video from Linus demonstrating a WiFi router. I don’t remember if it was WiFi 6 or 7, but any obstacle could cause connection drops.
I don’t know if things have improved since then, but I usually bond WiFi and PowerLine for rooms that Ethernet cannot reach.
wired will always be better, faster, more reliable, and cheaper
But what if you’re gaming downstairs and the router is upstairs and then you have to go upstairs for pizza rolls so you take your gaming laptop upstairs and you’re eating right next to the router and so you’re just plugged in and then what if you forgot to turn off the oven and your girlfriend is yelling at you “You’re going to start a fire! Why can’t you remember to turn off the oven? What’s wrong with you?” and then you go back downstairs to finish gaming?
If that happens often enough to be worth 43 times more than the cat cable, then it sounds totally justified to me. But also, what if you got a toaster oven for upstairs? To put next to the router?
I use the microwave for my pizza rolls like a savage. Problem solved.
I eat my pizza rolls cold, like a savage
Nah, wifi is pretty good today. I just dont like the consumer devices like the router shown here. Recently redid my wireless and went with a non wifi router, a poe switch and a few access points, connected through ethernet. I wouldnt dream of going back to the conventional one wifi router. Still use wired for stationary devices I can reach with a cable though… TV, AV, consoles, PC are all wired.
To be honest, I think a lot of Lemmy users are old and yearn for the older technologies simply because they have been more familiar with them than newer ones. They would have used the first gen of a technology, which may not be efficient, and dismiss it altogether, without realising that subsequent generations of that technology improves over time.
I have had that realisation of cognitive bias when I had Bluetooth headphones back in early 2010s. The wireless connection isn’t great and gets cut off every now and then. I dismissed the technology as less efficient than wired earphones. It was over the years with the popularity of airpods that I gave wireless earphones another chance. And honestly, the Bluetooth connectivity vastly improved than I expected and I would not go back to using wired earphones again on regular basis because I don’t have to deal with the wires getting tangled or yanked. I only use wired ones as backup if my wireless earphones went missing or broke.
Sorry to say this to OP, but it seems that you’re being an old man yelling at the clouds. Look, I’m also old and I admit I have had that moment of yelling at the clouds too. We will have that more moments as we age.
I have a similar setup to @PieMePlenty@lemmy.world in regards to my home network and I wouldn’t dream of removing my wifi network. I still consider wired to be superior though it rarely matters at those latencies.
My Windows laptop on wifi:
My Fedora on wired network:
Until the clip breaks off…
You could have 30 clips break and it would still be cheaper.
Let’s see that ethernet cable do orthogonal frequency-division multiplexing…
Who buys a $300 home wifi box? They’re $50-100
I set up a mesh router pair a while back - super easy setup, and the speed is good enough to have multiple TVs streaming at once, and without needing to run cables between rooms… Worth it.
I spend a lot more money on good Ethernet switches. But at least that works and is easier to manage than Wifi.
Yeah this kinda overlooks a lot of the issues with like… getting a cable somewhere
Curve ball… I use power line and for my property and in my use case it is not any different to ethernet.
EoP is really cool
$6.99/5’ of cable. A weekend of manual labor running cable through my walls.
Or $300 for something I can set-and-forget.
Decisions, decisions.
$300 in labor is wildly optimistic and true for a simple cable run, maybe
If run probably even a “short” run will typically be at least 20ft. Think, from a wall plate, up an 8ft wall, across a crawl space, down another 8ft wall.
Not all cable runs are simple
It doesn’t even cost that much for a decent wifi AP either.
I’m seriously thinking of getting a usbC-ethernet dongle for my mobile, for when I’m at my desk.
If you have wireless charging then you should definitely get the dongle. I have one for those times I need stability. Get a thin lightweight USB C extender so the dongle is not getting in the way.
Can you not charge and use a single USB-C port at the same time?
Yes you can. You just need a dock instead.
I mean I just have more than one port and can charge using the dedicated charging port.
What laptop are you using that makes it such an affair to use two USB-C ports?
Edit: I missed the “mobile” part
If I’m reading the thread correctly, they’re referring to a mobile phone which only has 1 USB port typically
Ah butts, you’re right, the first guy said “mobile” and I didn’t read it correctly. I can’t figure why they would ever need a connection like that for their phone, though.
Getting a USB dock instead would probably get you both charging and Ethernet.
I, too, have shitty wireless. In fact, for my work laptop, that’s exactly what I do. So much more reliable. Way too many wireless connections on too many channels close by.
